Multi-objective optimization of tungsten CMP slurry for advanced semiconductor manufacturing using a response surface methodology

Publication date: 5 March 2017
Source:Materials & Design, Volume 117
Author(s): Jihoon Seo, Joo Hyun Kim, Myoungjae Lee, Keungtae You, Jinok Moon, Dong-Hee Lee, Ungyu Paik
In this study, a response surface methodology (RSM) coupled with a face center cube design (FCD) was used to optimize the three principal components (i.e., Fe(NO3)3, H2O2, and SiO2 abrasives) in polishing slurries for a W barrier chemical mechanical planarization (CMP) process. The experimental ranges of the three components were 10–50ppm of Fe(NO3)3, 0.3–0.9wt% of H2O2, and 1–5wt% of SiO2 abrasives. Based on the experimental data from the FCD, the second-order models for the material removal rate (MRR) of the W and Oxide films were fitted; these were determined to be statistically valid and reliable. We have achieved the optimal conditions for the three components where the MRR is maximized and the selectivity between the W and Oxide MRRs is ~1. The predicted MRR and selectivity at the optimal conditions were well correlated with the results of a confirmation run, which was conducted by using the W barrier CMP process with W-patterned wafers. In addition, we employed a particular RSM called dual-response optimization in order to investigate the tradeoff between the MRR and selectivity. Based on the tradeoff information, process engineers can conduct the optimization of the three components more flexibly.

Graphical abstract

http://ift.tt/2jbsoBk