Growth rates dependence of macro/microstructures and mechanical properties of Ti-47Al-2Nb-2Cr-0.2Er alloy directionally solidified by cold crucible

Publication date: 5 July 2017
Source:Materials & Design, Volume 125
Author(s): Qiang Wang, Hongsheng Ding, Hailong Zhang, Shiqiu Liu, Ruirun Chen, Jingjie Guo, Hengzhi Fu
IntermetallicsTi-47Al-2Nb-2Cr-0.2Er alloys are prepared at different growth rates ranging from 0.6mm/min to 1.2mm/min via cold crucible directional solidification with the power of 50kW. The macro/microstructure evolutions and mechanical properties of the directionally solidified ingots are studied in details. The angles between the columnar grains and the growth direction increase gradually from the center to the edge of the ingot. The lamellae orientations show no distinct variations under the growth rates of 0.6–1.0mm/min, while the lamellae orientation deviates significantly from the growth direction at the growth rate of 1.2mm/min. The interlamellar spacing is inverse proportional to the growth rate. The alloy with finer interlamellar spacing shows higher nanoindentation hardness. The corresponding relationship between nanoindentation hardness (HN) and interlamellar spacing (λ) can be fitted by HN=36.3λ^−0.254. Hindrance of the semi-coherent interface to dislocation movement results in higher tensile strength of the alloy and the larger tensile elongation can be attributed to the improvement of the deformation uniformity.

Graphical abstract

http://ift.tt/2ot7m2S