Microstructural evolution and support vector regression model for an aged Ni-based superalloy during two-stage hot forming with stepped strain rates

Publication date: 15 September 2018
Source:Materials & Design, Volume 154
Author(s): Dao-Guang He, Y.C. Lin, Jian Chen, Dong-Dong Chen, Jian Huang, Yi Tang, Ming-Song Chen
The high-temperature flow characteristics and microstructural changes of alloys are usually investigated by isothermal compressive experiments at constant strain rates. However, during the practice industrial production of components, the strain rate is varying. In the present work, the microstructure changes and high-temperature flow characteristics of a Ni-based superalloy containing δ phases were researched by isothermal two-stage high-temperature compression experiments with stepped strain rates. It is revealed that the true stress of the later stage distinctly increases when the true strain/strain rate of the former stage or the strain rate of the later stage are raised. Meanwhile, the dynamic recrystallization (DRX) grains become finer, and the dissolution of δ phase is weakened. But, the coarsening of DRX grains and the dissolution of δ phase are enhanced as the deformation temperature is raised. The primary DRX nucleation mechanism is the discontinuous DRX. Based on the measured flow stress, an e-insensitive support vector regression (e-SVR) model is established for depicting the flow behavior of the researched alloy. The measured results are consistent with the forecasted ones, which illustrating that the developed e-SVR model is feasible to accurately describe the flow behaviors of the researched alloy during two-stage high-temperature deformation with stepped strain rates.

Graphical abstract

https://ift.tt/2Laq0W6